Standard Series Stump Grinder
Standard Series Stump Grinder
SKU: SKU: 124130
This is a carousel with product media. Use Next and Previous buttons to navigate, or jump to a slide.
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
Remove tree stumps quickly and efficiently with the Standard Series Stump Grinder. This simplified hydraulic design eliminates costly and unnecessary components — perfect for anyone looking for an economy option with the same quality performance Titan grinders are known for. Simply drive your skid steer in reverse to operate the grinder. 100% of your hydraulic output goes to the cutting wheel for maximum efficiency. And it has a built-in pressure relief valve to protect your machinery.
This implement attaches to skid steers with a skid steer quick tach connection, designed for a recommended flow rate of 18-23 GPM. And it’s designed with a hinge pin providing a degree of freedom to help prevent the cutting wheel from stalling.
Featuring 34 carbide steel bolt-on and replaceable teeth with an 830–1060 RPM cutting speed, this grinder has a 6.7" cutting depth below ground to prevent unwanted trees from growing back.
Designed with a low profile, the grinding wheel is always in view from the cab for safe and accurate use every time and comes with a bolt-on mesh safety deflector to protect your skid steer from flying debris. The mesh guard also doubles as a kickstand when not in use.
*We recommend using this stump grinder with an enclosed cab.
Specifications
Specifications
Overall Height
37-in.Overall Width
51-in.Overall Depth
49-in.Cutting Height Below Ground
6.7-in.Rotor Size
24-in.Cutting Wheel Speed
830 - 1060 RPMHydraulic Flow
18 - 23 GPMHydraulic Pressure Requirement
3,000 PSINo. of Teeth
34Material
Finish
Powder-Coated Charcoal/OrangeMaterial
SteelWeight
Product Weight
637 lb.Details
- Standard Series hydraulic stump grinder
- Skid steer quick tach connection
- Bolt-on carbide steel teeth
- 18–23 GPM hydraulic flow rate
- 830–1060 RPM cutting speed
- Bolt-on mesh safety guard
- Built-in pressure relief valve
REPLACEMENT PARTS:
- 124131 - 12 Pack Replacement Teeth
Additional Info
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.
Reviews & Questions
Recently Viewed
Standard Series Pallet Fork Frame Attachment
Standard Series Pallet Fork Frame Attachment, Fits John Deere Tractors
Medium-Duty Clamp-On Pallet Forks
Economy Series Pallet Fork Frame Attachment
