⚡ Deal of the Week -25% off Post and Tree Puller
Shop All Weekly Deals
☀️ Lay the groundwork with deals on Rotary Tillers
Shop Now
Scratch and Dent, 72" Rear Blade For Grading And Scraping| Cat 1 3pt
SKU: SKU: R191459
This is a carousel with product media. Use Next and Previous buttons to navigate, or jump to a slide.
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
* Scratch and Dent items are not eligible for returns or warranty claims. *
* Scratch and Dent Deal - item may have cosmetic damage *
The 72” Rear Blade for category 1 3-point hitch is ideal for grading and scraping dirt, snow, sand, and rocks. It is designed to connect directly to your category 1 3 point hitch and does not require any hydraulics. Simply pull the set of pins to change the angle or slide the blade to an offset position. There are 12 total positions to set your blade to the perfect angle, as well as multiple sliding positions for offsetting the blade making it ideal for grading land and pushing dirt and snow out of the way. 5 of the positions allow the blade to be used in forward motion and 7 allow it to be used in reverse. The bolt on cutting edge is a heat-treated high carbon steel and can be reversed giving you extra life out of the blade.
ANGLES SIDE TO SIDE: The adjustable blade offers 5 forward and 7 reverse angle settings Each setting changes the angle of the blade, allowing you to clear and push debris, dirt, snow, sand, and more to the desired side, while controlling the amount dispersed. The blade’s angle is set using a heavy duty pin to ensure the blade’s angle does not change during operation.
FITS CATEGORY 1 3 POINT HITCH: The 6’ rear blade is designed to fit tractors equipped with the category 1 3 point hitch. The top link pin and lower lift pins are included for your convenience. No hydraulics rear remotes are required to operate the 3pt rear blade.
REPLACEABLE BOLT ON CUTTING EDGE: The 72” 3 Pt Rear Blade is equipped with a bolt on cutting edge made from AR400 steel. This cutting edge is heat treated high carbon steel and can be reversed giving you extra life out of the blade.
MANUAL ROTATION: The manual rotation of the blade offers a total of 12 angled settings, 5 forward facing and 7 rear facing. This allows this rear blade to be used with tractors without rear hydraulic remotes. Easily set the angle and attach the heavy-duty locking pin to secure the blade’s position and begin grading or scrapping the ground or plowing through snow.
DIMENSIONS: The overall width of the 3 point rear blade is a 72”. The depth of the 3 point to the back of the blade is 25-1/2". The overall height of the blade is 14”. The entire 6’ rear tractor blade will weigh a total 350 LB.
Weight
350 LBWidth
72”Blade Height
14”Depth
25-1/2” (From 3pt To Back Of Blade)Material
HD SteelFinish
Powered-Coated Yellow
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.
