1 Cubic Yard Self-Dumping Hopper
1 Cubic Yard Self-Dumping Hopper
SKU: SKU: 191562
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
The Self-Dumping Hopper, available as a 1 or 2 cu. yd trash dumpster makes it easy to store, move, lift, and dump site waste, food scraps, gravel, or other raw materials. Constructed from heavy-grade steel, the reinforced Hopper is perfectly balanced to roll forward when loaded, dump completely and automatically return to upright, locked position for reloading. The Hopper is attached to a durable base with a laser-cut track encompassing taper pins and a fork-mounted pocket that fits 36" or 48" pallet fork blades, depending on the size of the hopper you buy. The forks should never extend beyond the front of the hopper base.
After securing the Hopper to the forklift truck:
1. Transport the Hopper to the desired location.
2. Raise the Hopper to a safe dumping position.
3. Place the base of the Hopper onto the lip of the container the Hopper is dumping into, flip-over the orange handle latch to allow the trip lever to release waste.
Once the load has been emptied, upright the Hopper into the fill position by lowering the bucket, so the lip connects with the bulk container, rocking the Hopper back until the latch pin locks in place with the trip lever handle.
Specifications
Specifications
Overall Height
37.5-in.Overall Width
41-in.Overall Depth
50-in.Inside Height
30-in.Inside Width
37.75-in.Inside Depth
47-in.Hopper Thickness
3/16-in.Fork Pocket Length
31-in.Fork Pocket Dimensions
5.5-in. x 3-in.Dumping Angle
30-DegreesMaterial
Finish
Powder-Coated Charcoal/OrangeMaterial
SteelWeight
Volume Capacity
1 Cubic YardWeight Capacity
6,000 lb.Product Weight
610 lb.Details
- Fork mounted trash hopper
- Slick surface to prevent material from sticking
- Flip-over handle latch secures the hopper in the closed position
- Handle latch allows the trip lever to open for forward dumping
- Base with laser-cut track and taper pins
- Reinforced front body angle
- Holds up to 6,000 LB capacity
- Steel lid, steel casters, and pull-down latch sold separate
- Safety chains are not included
Additional Info
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.