SCRATCH AND DENT - 72-in Fine Grade Skeleton Rock Bucket w/ Teeth For John Deere Loader - FINAL SALE
SCRATCH AND DENT - 72-in Fine Grade Skeleton Rock Bucket w/ Teeth For John Deere Loader - FINAL SALE
SKU: SKU: R115006
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
* Scratch and Dent items are not eligible for returns or warranty claims. *
* Scratch and Dent Deal - item may have cosmetic damage and/or chipped powder coat *
The Titan Attachment's 6-ft Fine Grade Rock Bucket is perfect for loading rock, tilling soil prior to planting, sifting debris from dirt or sand, and more! We designed the Titan Attachment's Rock Bucket to fit a John Deere loader with 3-inch tine spacing to sift smaller debris and material from your dirt, sand, and soil. We have also powder-coated these buckets green to protect against rust and corrosion, keeping your skeleton rock bucket looking and performing like new for years to come. The buckets 0.75-in cutting edge is equipped with replaceable C3R02 Teeth that are 6-in long, and the tines are a massive 0.5-in thick.ECONOMICAL DESIGN: The 6-ft Fine Grade Rock Bucket fit for a John Deere loader is constructed using 0.5-in grade 50 structural steel. The sidewall thickness is an impressive 0.5-in thick, providing plenty of support. At the top of this rock and debris bucket, we have added a 4-in x 4-in 9-gauge tubular steel support, which adds to the structural integrity other rock buckets do not have.
HOOK AND PIN CONNECTION: This rock bucket is designed to fit John Deere tractors equipped with the hook and pin carrier. Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, and 460 series loaders. The bottom pin set fits 500, 510, 520, 521, 540, 541, and 542 series Ag loaders.
A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments low profile Rock Skeleton Bucket is designed to easily scoop and sift material from dirt, mulch rocks, debris and more. Making this bucket ideal in any situation and an invaluable attachment for your loader.
DIMENSIONS: With the overall dimensions of 72-in wide, 51.5-in deep, and 20-in high, you can carry plenty of material which allows you to make fewer trips, saving time and money. The lightweight design allows you to utilize your loader's lifting capacity and carry these more substantial loads.
Details
- Convert your loaders from the quick tach to hook and pin style loaderReinforced side cutters and cutting edge for long life.
- Welded on 0.75-in thick cutting edge.
- Black powder-coated to prevent rust and corrosion.
- 6 Replaceable teeth.
- Open tines for sifting debris.
Additional Info
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.