SCRATCH AND DENT - 3 Point 68" Flail Mower - FINAL SALE
SCRATCH AND DENT - 3 Point 68" Flail Mower - FINAL SALE
SKU: SKU: R191523
This is a carousel with product media. Use Next and Previous buttons to navigate, or jump to a slide.
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
* Scratch and Dent items are not eligible for returns or warranty claims. *
* Scratch and Dent Deal - item may have cosmetic damage and/or missing hardware *
The 68-inch Flail Mower is crafted for maintaining vegetation such as grass, overgrown brush, and vines. Its fast blade speed makes it perfect for managing your fields, orchards, vineyards, and other farm properties. Built as a rear-mounted mower compatible with Category 1 tractors and loaders with a 3 Point hitch. This model can handle up to 5 acres or more and features replaceable forged hammer blades that will cut and mulch wooded material up to 3" in diameter. It is powered by a PTO shaft with a heavy-duty gearbox that turns the knife shaft, cutting the mowed material down to a minimum, which allows it to decompose quickly. For best results, we recommend using a tractor with a minimum of 40 HP and a maximum of 60 HP. Their linear cut reduces the risk of thrown debris, making them a better choice for mowing areas with rocks, branches, and debris anywhere people may be present.NOTE: When you order this product, we will need your phone number for the trucking company to schedule delivery. Without your number, there could be a delay.
Specifications
Specifications
Cutting Width
68-in.Overall Width
74.5-in.Roller Diameter
4-in.Rotor Shaft Diameter
4.5-in.Blade Swing
14-in.Recommended for Tractors
40 HP – 60 HPMinimum Power
30 HPGearbox Rating
65 HPNumber of Belts
33PT Center To Center Bottom Pins
23.5-in.3PT Top Link Pin To Bottom Pins
20-in.Side Plate Thickness
0.25-in.Finish
Powder-Coated Charcoal/OrangeMaterial
SteelProduct Weight
615 lb.Details
- Offset Category 1, 3 Point Hitch
- Forged hammer flails
- Ability to mulch up to 3" diameter material
- Recommend for use on 40-60 HP tractors
- Max gearbox rating of 65 HP
- Front safety chains to protect from debris
- Sealed tapered roller rotor bearings
- Kickstand for easy storage when not in use
- DIRECT REPLACEMENT BLADES
- 191467 5 Pack 3.5" Wide Flail Hammer Blades
- 191537 4 Pair Set Y Blades
Additional Info
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.
Reviews & Questions
Recently Viewed
Standard Series Pallet Fork Frame Attachment
Standard Series Pallet Fork Frame Attachment, Fits John Deere Tractors
Medium-Duty Clamp-On Pallet Forks
Economy Series Pallet Fork Frame Attachment
