SCRATCH AND DENT - 10" x 32" Wide Aluminum Threshold Ramp - FINAL SALE
SCRATCH AND DENT - 10" x 32" Wide Aluminum Threshold Ramp - FINAL SALE
SKU: SKU: R323120
This is a carousel with product media. Use Next and Previous buttons to navigate, or jump to a slide.
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
* Scratch and Dent items are not eligible for returns or warranty claims. *
* Scratch and Dent Deal - item may have cosmetic damage and/or missing hardware *
The 10" x 32" Threshold Ramp is a lightweight yet portable wheelchair ramp designed for doorways, sliding glass doors, and raised landings. The ramp makes using a walker or wheelchair to move around easier. Made from non-rust, slip-proof and water-resistant aluminum that is perfect for use in any area, both indoors and outdoors. In addition, moving furniture with wheels or casters no longer requires lifting over thresholds, raised landings, or doorways.Specifications
Specifications
Overall Length
10-in.Overall Width
32-in.Overall Thickness
2.5 mmMaterial
Aluminum1 Axle Weight Capacity
300 lb.2 Axle Weight Capacity
600 lb.Product Weight
3.5 lb.Details
- Suitable for wheelchairs, walkers, or people with canes
- Can be used indoors or outdoors in residential or commercial settings
- Easily move furniture with casters and wheels
- Low curbs allow doors to easily swing open over the ramp
- Anti-slip surface for increased grit traction for added safety and grip
- Includes pre-drilled holes for optional permanent mounting
- Good for 1/2-inch to 3/4-inch rises
- MAXIMUM *OCCUPIED/**UNOCCUPIED HEIGHT LIMIT TO GROUND LEVEL:
- 2 FT Ramp: Occupied loading: 4-in maximum, unoccupied loading height: 6-in.
- 3 FT Ramp: Occupied loading: 6-in maximum, unoccupied loading height: 9-in.
- 4 FT Ramp: Occupied loading: 8-in maximum, unoccupied loading height: 12-in.
- 5 FT Ramp: Occupied loading: 10-in maximum, unoccupied loading height: 15-in.
- 6 FT Ramp: Occupied loading: 12-in maximum, unoccupied loading height: 18-in.
- 7 FT Ramp: Occupied loading: 14-in maximum, unoccupied loading height: 21-in.
- 8 FT Ramp: Occupied loading: 16-in maximum, unoccupied loading height: 24-in.
- 9 FT Ramp: Occupied loading: 18-in maximum, unoccupied loading height: 27-in.
- 10 FT Ramp: Occupied loading: 20-in maximum, unoccupied loading height: 30-in.
- *Occupied is a person sitting in the wheelchair/scooter while loading (2:12 slope or 9.6-degree angle)
- **Unoccupied is loading with nobody sitting in the wheelchair/scooter (3:12 slope or 14.5-degree angle)
- MAXIMUM WEIGHT CAPACITY IS 600 LB
- (WEIGHT RATING IS BASED ON EVENLY DISTRIBUTED LOAD ON 2 AXLES)
Additional Info
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.
Reviews & Questions
Recently Viewed
Standard Series Pallet Fork Frame Attachment
Standard Series Pallet Fork Frame Attachment, Fits John Deere Tractors
Medium-Duty Clamp-On Pallet Forks
Quick Tach Mount Plate
