Forklift Mounted Front Loader Dump Bucket
Forklift Mounted Front Loader Dump Bucket
SKU: SKU: 114302
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
NOTE: Titan recommends using 36" Category II pallet fork blades.
Specifications
Specifications
Overall Height
24-in.Overall Width
68.5-in.Overall Depth
60.5-in.Inside Height
21-in - 14-in.Inside Width
65-in.Inside Depth
55-in.Pull Cord Length
9 FT 6-in.Inside Fork Pocket
6-in. x 2.75-in.Center to Center Fork Pocket
25-in.Weight Capacity
4,000 lb.Product Weight
532 lb.Details
- Attaches to 36" long pallet fork blades
- Safety chain and dumping pull cord included
- Beveled front edge provides better scooping ability
- Unique design returns to the locked upright position when set down on the ground
- Dump angle is 90 degrees
- Welded bucket to prevent leaking
- One man operation
Additional Info
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.