3 Point Subsoiler Attachment Fits Cat 2 Tractors
3 Point Subsoiler Attachment Fits Cat 2 Tractors
SKU: SKU: 191314
This is a carousel with product media. Use Next and Previous buttons to navigate, or jump to a slide.
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
NOTE: True subsoiling depth varies depending on how low your 3 Point hitch gets to the ground. Check the product specifications and your 3 Point hitch before purchasing to ensure you can reach desired depth
Specifications
Specifications
Overall Height
52.5-in.Frame Overall Width
31-in.Frame Overall Depth
23-in.Overall Width (Pin to Pin) 40-in.
Shank Dimensions29-in. x 8-in. x 1.25-in.
Tooth Dimensions10.5-in. x 2-in.
Shank PositionFixed
Max Penetration18-in.
Minimum Tractor HP Required25 HP
FinishPowder-Coated Charcoal/Orange
MaterialSteel
Product WeightDetails
- Compatible with Category 2, 3 Point Hitches
- One-pass water drain system
- Single shank design with a working depth of 18"
- Heat-treated steel tine and shank designed to break hard, low ground, where water accumulates
- Improve drainage and allow roots to grow deeper without saturation
- Break up hard and dry soils, breakthrough clay layers, or lay irrigation pipe
- Includes top link pin and lower lift pins
- Comes with a kickstand for easy hookup and storage
Additional Info
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.
Reviews & Questions
Recently Viewed
Standard Series Pallet Fork Frame Attachment
Standard Series Pallet Fork Frame Attachment, Fits John Deere Tractors
Medium-Duty Clamp-On Pallet Forks
