57" 3 Point Offset Flail Ditch Bank Mower
57" 3 Point Offset Flail Ditch Bank Mower
SKU: SKU: 191520
This is a carousel with product media. Use Next and Previous buttons to navigate, or jump to a slide.
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
Trimming and maintaining banks, roadsides, ditches, and shorelines can be challenging. Thankfully, our bank mowers are built to efficiently handle overgrown grass on ditches and embankments.
Equipped with forged hammer flail blades, these mowers can cut and mulch material up to 3" in diameter in one pass. The finely shredded cuttings act as a fast-decomposing, micronutrient-rich fertilizer, nourishing your land. The trimmings drop directly to the ground, reducing debris. Plus, an adjustable rear roller provides precise cutting height control, ensuring a clean, even cut on uneven terrain.
The 48", 57", and 65" models are compatible with Category 1 tractors, offering a 65-degree up-and-down pivot and 90-degree vertical rotation for easy maneuvering. The 78" model, built for Category 2 tractors, pivots 90 degrees up and 49 degrees down, delivering a precise, clean cut every time.
Specifications
Specifications
Cutting Width
57-in.Overall Width
66-in.Side Plate Thickness
0.25-in.Roller Diameter
4-in.Rotor Shaft Diameter
4.5-in.Blade Swing
14-in.Pivot Angle
65-degrees up & downVertical Transport
90-degreesNumber of Belts
3Hook-Up
PTO Turning Speed
540 RPMPower Required
25-50 HPMinimum Power
25 HPDrive Type
PTOHitch
Category 1Weight
Product Weight
643 lb.Details
- Offset Flail Ditch Bank Mowers
- Rear-mounted tractor attachment
- 48", 57", and 65" models are compatible with Category 1 tractors
- 78" model is designed for Category 2 tractors
- Powered by PTO shaft with shear bolt
- Mulch up to 3" diameter material
- Replaceable forged hammer blades
- Adjustable rear roller
- Safety chains
- Sealed tapered roller rotor bearings
- Kickstand for easy storage
48", 57", and 65" FLAIL MOWER REPLACEMENT PARTS:
- 191468 - 5 Pack 3" Wide Flail Hammer Blades
- 191538 - 4 Pair Set Y Blades
- 191599 - 55" PTO Shaft with Shear Bolt
- 191609 - Replacement Belts
78" FLAIL MOWER REPLACEMENT PARTS:
- 191469 - 5 Pack 5.5" Wide Flail Hammer Blades
- 191610 - Replacement Belts for 3 PT Flail Ditch Bank Mowers
- 191600 - 71" HD PTO Shafts with Shear Bolt
- 191609 - Replacement Belts
Additional Info
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.
Reviews & Questions
Recently Viewed
Standard Series Pallet Fork Frame Attachment
Standard Series Pallet Fork Frame Attachment, Fits John Deere Tractors
Medium-Duty Clamp-On Pallet Forks
Economy Series Pallet Fork Frame Attachment
