60" Flail Mower with Hydraulic Side Shift
60" Flail Mower with Hydraulic Side Shift
SKU: SKU: 191528
This is a carousel with product media. Use Next and Previous buttons to navigate, or jump to a slide.
This is a carousel with product media thumbs. Use the thumbs to navigate, or jump to a slide.
Product Overview
The Flail Mower with Hydraulic Side Shift is designed to make easy work of maintaining vegetation such as grass, heavy undergrowth, and tree prunings. With the ability to slide 8" in either direction (left or right), this flail mower makes those hard-to-reach areas an easy cut!
Featuring forged hammer flail blades, this mower cuts and mulches materials up to 3" in diameter in a single pass — then shreds your cuttings into fine bits of quickly decomposing grass that are dispersed across your lawn to nourish your land as micronutrient-rich fertilizer. And trimmings fall to the ground instead of to the sides, reducing potentially dangerous projectile debris.
Attach your mower to any Cat 1 tractor or loader with a 3 Point hitch for easy installation. This mower is powered by your machine’s PTO. For optimum power and capability, we recommend using a tractor with a minimum of 40 HP and a maximum of 50 HP for the 60" cutting width and a minimum of 45 HP and a maximum of 55 HP for the 42" cutting width.
Plus, an adjustable rear roller allows for precise cutting height control, even on uneven ground. That means you get a clean and even cut, no matter the terrain!
NOTE: When you order this product, we will need your phone number for the trucking company to schedule delivery. Without your number, there could be a delay.
Specifications
Specifications
Working Width
60-in.Overall Width
66-in.Roller Diameter
4-in.Rotor Shaft Diameter
4.5-in.Blade Swing
14-in.Slide Distance
16-in.Pivot Angle Vertical
90-degreesSide Plate Thickness
0.25-in.Power
PTO Turning Speed
540 RPMPower Required
40-50 HPMaterial
Number of Belts
3Finish
Powder-Coated Charcoal/OrangeMaterial
SteelWeight
Product Weight
659 lb.Details
- Rear-mounted tractor attachment
- Offset Category 1, 3 Point Hitch
- Powered by 540RPM PTO shaft
- 8" (left-or-right) side shift
- Mulch up to 3" diameter material
- Replaceable forged hammer blades
- Adjustable rear roller
- Front safety chains
- Kickstand for easy storage
REPLACEMENT PARTS:
- 191467 - 5 Pack 3.5" Wide Flail Hammer Blades
- 191537 - 4 Pair Set Y Blades
- 191519 - 35.5" PTO Shaft with Shear Bolt
- 191609 - Replacement Belts
Additional Info
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.
Reviews & Questions
Recently Viewed
Standard Series Pallet Fork Frame Attachment
Standard Series Pallet Fork Frame Attachment, Fits John Deere Tractors
Medium-Duty Clamp-On Pallet Forks
Economy Series Pallet Fork Frame Attachment
